Overview
- Diameter: 4-1/2" - Arbor Hole: 7/8" - Grit: 60 - Type 29 - Max RPM: 13,300 - Grain Type: Aluminum Oxide
Features:
- Made of hard zirconia material that lasts longer than standard wheels - Built for a more robust and economical grinding wheel - Suitable for blending workpieces at high speeds and high loads for polishing - Great for grinding irregular-shaped surfaces - Ideal for sanding, rust removal, and light sanding on various surfaces
Helpful Hints
- Minimum of 1 hp for every 1" of wheel diameter - Never exceed the recommended RPM for maximum performance and safety - Most efficient cutting rate - use 2 to 3 seconds per square inch as a guideline - Position materials for the slightest contact between the wheel and workpiece - Flanges should be equal in diameter, recessed, and at least 1/3 the diameter of the wheel for wheels 12" or larger
Notes - Important
- Always use a guard and wear eye protection - Always comply with ANSI B7.1 and OSHA regulations - Never exceed the maximum rate speed marked on the wheels - Never use a cracked, dropped, or damaged wheel - Never force a wheel onto a machine or alter the size of the mounting hole - Never use mounting flanges for Type 1 cut-off wheels unless they are 1/3 the diameter of the wheel and are clean, and flat - Never overtighten the mounting nut
